/lead.jpg)
Advanced Cyclone Systems (ACS) is exclusively dedicated to the most advanced cyclone systems worldwide.
Applications include product (powder) recovery in the pharmaceutical, chemical, and food industries. High-efficiency powder separation / filtration is frequently needed after spray dryers, fluid bed dryers, granulation, and pneumatic transport.
Recovery of pharmaceutical ingredients with cyclone systems
Efficient recovery of active pharmaceutical ingredients (API), chemical substances, and food powders after applications such as spray and fluid bed drying is frequently a problem. To recover these sensible products, cyclone collectors are frequently irreplaceable equipments for allowing a direct powder capture without filters.
Cyclones also avoid contamination of filter bags, product cross-contamination, and product degradation with temperature.
Client needs include a cyclone system, which dramatically increases powder yield and is efficient enough to comply with regulatory particulate matter (PM) limits, avoiding use of a bag filter.
Cyclones for API recovery
Due to a high-efficiency, Hurricane cyclones have been commercialised several times for the recovery of very fine APIs in the pharmaceutical / biopharmaceutical industries.
Common associated product losses due to low efficiency of cyclone separators are minimised with Hurricane geometries. These cyclones demonstrate impressive efficiencies even in capturing inhalable powders with a median volume diameter (MVD) of less than 3µm. This results in impressive improvements of high-value powder collection.
High-efficiency cyclones with recirculation
ReCyclone® MH Systems are ideal for upgrading Hurricane cyclones’ performance and minimising powder losses (down to 50%). This product is especially important for specific cases where electrostatic ReCyclone Systems cannot be applied, such as when organic solvents are used.
For the recovery of these sensible products, ReCyclone MH Systems maintain cyclones’ advantages, since the product is only discharged through the Hurricane. These systems are perfectly aseptic, do not have moving parts, and can easily be cleaned through clean-in-place (CIP) mechanisms. Recirculation can be provided through a venturi or a blower, depending on the type of powder processed.
This product is especially important for specific cases where electrostatic ReCyclone Systems cannot be applied, such as when organic solvents are used.
Recovery system for extremely fine APIs
ReCyclone EH Systems are the best technology available for the recovery of very fine and valuable APIs in pharmaceutical / biopharmaceutical drying processes. This is the case of nanoparticles.
ReCyclone EH Systems are ideal to maximise performance and minimise powder losses (down to 25% of Hurricane cyclones). This product is especially important for specific cases in the processing of very valuable powders.
For the recovery of these products, ReCyclone EH Systems maintain cyclones’ advantages, since the product is only discharged through the Hurricane. These systems are perfectly aseptic and have no moving parts.
Cyclone systems for powder recovery
Advanced Ctclone Systems’ products are used for powder recovery in the following applications:
- Pharmaceuticals
- Chemicals
- Food ingredients
- Nanoparticles
- Mineral processing
- Fertilisers
- Catalysts
- Milling and drying processes
Cyclone systems for emission control and air dedusting
The cyclone systems are also used for emission control and air dedusting in the following applications:
- Biomass and coal boilers and dryers
- Fuel oil boilers
- Steel and ferrous alloys
- Clinker cooler air dedusting
- Pyrolisis, incineration and gasification
- Calcination processes
- Glass and ceramic furnaces
- Air caption and dedusting
- High-temperature separation processes